Reduction Gear and Transfer Gear Phase Matching |
Author: Subaru |
NUMBER: 16-52-92 DATE: 04-14-92 APPLICABILITY SUBJECT: Whenever installing or replacing the reduction gears or transfer gears in a 4EAT, it is important that the phase matching marks are aligned. These gear sets are sold in matched sets. The matched sets are indicated by identical numbers painted on the gears. The phase matching marks are painted on 2 teeth on one gear and one tooth on the matching gear. The proper position of the phase marks when installing the gears is to line up white dot marks. Phase matching will help reduce gear noise when installed properly. |